Last Updated 2/6/2012
Click on the vehicle images below to enlarge. Scroll down to see everything available. | 2011 DANCO Side Dump Pull Trailer
Panelam Sides, 4' Racks, & Used Tires & Wheels
$35,700 + FET & Lic. |
| 1990 22' Side Dump
4' Racks, New Rams, and New Fifth Wheel Plate. Great Working Trailer
$10,500 |
| 1996 Western Star w/ 20' Side Dump
Model 4964F, 3406E Cat, Engine Brake, 355 hp, 9 speed, 439,000K, 12000 Front rt-40-145 Rear Alum Wheels, 24.5.
$35,000 |
 S O L D
| 2010 Chain Drive 34' Semi Trailer
Loaded with MDO wood sides and all inside rams.
$54,950 |
| DANCO 20' Chain Drive Box on a 1998 Intl 9100
Stock # 075009 11.1 Detroit, 370hp, 413K, RM09145B Tranny, AR, AC, Cruise, Low Pro 22.5, Steel Hub Pilot, 170"wb, 105"c-t, Wet Kit, With New Paint Job. 20' DANCO box fully loaded.
$55,950 |
 S O L D
| 1991 Intl with 18' DANCO Chain Drive Box
9670 Intl. 3176 Cat, 9 speed Fuller with Spicer N400. AC, CC, PS, & Jake. Steel Wheels. Box has Hyd Wing Fling & Back Doors, Air Flop Door, Manuel Top Doors, & Wood Sides.
$32,000 |
 S O L D
| 2011 Spreader 30' Semi Trailer
Used Axles, Tires, & Wheels. Wing Fling & Air Locking Rear Doors.
$53,550 + FET & Sales Tax |
| 30' V-Bottom Spreader
Also have 1981 Pete set up to run spreader. Cummins 350.
$26,000 Trailer Only O.B.O. $37,000 Truck and Trailer Set O.B.O. |
| 2005 Spreader Box 10'
Heavy Built, Will Do Manure Or Composte Fertlizer Down To 1,000Lb/Acre, Used About 50 hrs, All Hydraulics, Tank & Pump.
$10,000 Call: (209) 675-6022 |
 S O L D
| 2000 Sterling
Eaton Fuller Cat C12 Automatic with Petal. All alum wheels.With Wet Kit.
$16,500
|
 S O L D
| 2000 Intl.
International 9100 Cummins ISM motor, Spicier 9 speed.
Two Available $15,000 & $17,000
Call: (916) 804-0969 |
| 1998 Intl 9200
Stock #053532 M-11, 10sp, 666K, 172"wb, 108"c-t, AR, AC, PS, Jake, Low Pro 22.5, 6 Alum Wheels, Pro Tech Tool Box, & Head Board, With Wet Kit With Alum Tank, 275/80 R22.5 Front Wheels.
$27,500 |
| 1997 KW T800
Stock # 752136 M11 370e+, RTX41710C, 781K, 2 Bag Pete Air ride, PS, AC, Jake, Cruise, Alum Outers, Steel Inners, Pilot, Single Axle, 11R22.5, 176"wb, 80"c-a, Holland Air Slider, 24"Sleeper.
$15,500
|
| 1988 Intl 9670
Stock # 572287 NTC Cummins, 300hp, 9 Sp tranny, 202"wb, 166"c-t, 4 spring susp, PS, AC, 11R-24.5, steel Budd wheels, $6K spent on cam, rear axle etc in 11/05
$6,500 |
| 1984 Intl.
Cummins 350 Hp. 10 Speed Tandem Rear End, 4 Spring Susp., Cab-Over, PS, Edbro Large Wet Kit for Dump.
$4,500
|
| Jack Rabbit
1962 White Freightliner Exhibition Wheel Standing Pull Truck Powered by 500 hp 440 Dodge Engine.
$12,500 Firm |
| 1991 Western Star w/ End Dump Box
Cummins Engine, Round Bottom Gravel End Dump Box.
$19,950
|
| Dump Bed
16' x 8' Steel Floor Dump Bed with 3' Steel Racks (No Tail Gate) With Twin Ram Hyd. Hoist and PTO Driven Dump Pump.
$3,500 |
| 24'Frameless End Dump
Single Axle Set up for Chopping Silage with Partial Top.
$6,250 |
| End Dump Silage Box Bed
With Front Mount
$2,500
|
| Set of End Dumps
Four Sets Available
$15,000 Each
|
| 1996 Pete 378 Daycab
Stock #371496 3406e, Jake, 9 Speed, 230"wb, low air leaf susp, PS, AC, Cruise, 36" Sleeper, 295/75R-22.5, All aluminum pilot wheels, stationery Fontain 5th wheel, updated engine work, approx 200k on inframe & new clutch. New Paint. Now with New McLellan Water Tank.
$54,950 |
| 1989 Pete w/ Water Tank
Cummins LTA10, 375, 10 sp, Spring Suspension. Conventional, PS, Jake, Removable Sleeper, & AC. Tandem Rear End, All Steel Budd Wheels, 11R-22.5 Tires, & Aluminume Frame.
$25,950 |
| 1979 GMC with Custom Built Trailer
79 GMC tractor with 325 HP Cummins. Extensive maintenance records, 50K miles on an in-frame overhaul, air ride, air conditioning, power steering, cruise control, good rubber all around. Custom built trailer with 23' flat and 7' kick-up over 5th wheel Inside dimensions 94" h by 98" w. 7,000 lb. axles with air over hydraulic brakes all wheels. AC-powered lights (3 8' fluorescent fixtures), 120v / 3/4 HP winch, cabinets.
$12,000 for both or will seperate |
| 2004 John Deere Swather 4890
Excellent Condition
$35,500
|
| Pull Behind Dump Trailer
For Pulling Behind Farm Tractor No Brakes
$3,500 As Is |
| Trailmobile Equipment Trailer
42'6" Deck Length, Diamond Plate Floor, 116" Rear to Center of Trunion
$4,750 |
| Utility Equipment Trailer
30' Over All Length, 18' Lower Deck, 7' Upper Deck, 37" Deck Height, 4' Ramps, Single Rear Axle
$4,500 |
| 24' Flat Bed
With Hardwood Floor, Stake Pockets, Rope Hooks, and 54" Headboard Diamond Plate
$5,500 |
| 28' Flat Bed Pull Trailer
Stock # 592235 w/Sliding Drawbar 7 Extentions
$3,000
|
| 84 Tandem Axle Pintle Hitch Trailer
13' Deck, 5' Beaver tail, 16" tires, with fold up ramps.
$3,000 |
| Tilt Bed Trailer
23' Long, 8' Wide. Air Brakes & 7' Draw Bar
$1,500
|
| 2005 Enconoline 24 Ton Tilt Trailer
25' Deck, Used One Season, Low Miles
$16,500 OBO Call: (209) 675-6022 |
 1978 Miller Trailer
Tilt 12 Ton, 18 Ft. Deck, Some Floor Air Brakes
$2,500 OBO Call: (209) 675-6022 |
| 1958 Rodger Low Boy
New Brakes & Bearings W/Apx 3,000 Miles, Hauled a Lot Of Weight, Air Brakes
$2,500 |
| 1980 Anji Walking Floors
Rollover Tarps and 295/75-22.5 Tires.
$23,000 For The Set OMO
|
| 45' Storage Van
With Side Doors and Racks inside.
$1,500 |
| 1990 Ford Van
Stock # M01182 w/26' Van, 108K
$7,500 |
 S O L D
| Kiby Wagon For more info call: (209) 634-7223
$1,300 |
 S O L D
| 920 Cat Loader
For More Information Call: (209) 634-7223
$19,000 |
| 6 Compartment Fuel Tank
1,500 Gallon Capacity
$500 |
| 7 Wire Curly Cable Nine Available $5.00 Each
Cab Mount- Electric and Glad Hand Holder Five Available $2.50 Each |
| Air Lines with Glad Hands
$15/Pair |
| Cable Hoist
3-5 Available. Ingersol Rand 2000lb Capacity, Air Hoist.
$200 |
| Premier 480 Hitches
Non Air
$60.00 Each |
| Holland PH-210 Air Shockless Type. Without Plunger Air pot & Bracket. $75.00 Each - 9 Available
Premier 470 Air Shockless Type. Without Air Pot & Bracket $100.00 Each - 3 Available
Crossmember Type Air Hitch Shockless. $75.00 Each - 5 Available - SOLD |
| Manual Elec./Hyd. Shop Forklift
$750 ea |
| Steel Blade Cut Off Saw
Promaco Production Machinery Inc. Promacult 11B 220/440- 3 Phase
$950 |
| Nibbler
W.J. Savage Company Knoxville, Tennessee Savage Nibbling Machine, Size #236, Capy 1-4 Speed: 500 Serial #401733
$950
|
| Walnut Elevator
For More Information Call: (209) 386-3695
$6,000 |
|